Tektronix AD007 Manual de usuario descargar pdf (Pagina 35)

Getting Started

AD007 User Manual

19. Click on Submit. The new IP address is now in nonvolatile

memory.

20. Power off the adapter.

21. Power on the adapter to boot up the adapter with the new settings.

22. Restore the previous network settings on your PC and reboot

your PC.

23. To verify that the network installation is complete, perform the

procedure to access the web page interface on page 26.

24. After you have verified access to the web pages, continue with

the rest of the proce dures in the Getting Started section.

Setup Procedure 4 - DHCP Server, Dynamic IP Setup or Operation

If the following conditions are true, the network has automatically

configured the network settings of your adapter, but you must

determine t he IP address allocated by the server in order t o use or

manually rec onfigure the adapter.

H The net work administrator veri fies that you have a DHCP/

BOOTP serve r on your network.

H The network administrator has indicated that the DHCP/BOOTP

server is configured to allocate a dynamic IP addre ss to the

Ethernet hardware address of your adapter.

H The network administrator has not assigned you a static IP

address -- or -- you must determine the dynamically allocated IP

address in order to access and set the static IP address of your

adapter.

H One end of the RJ-45 cable is connected to the RJ-45 connector

on the back of the AD007 adapter. Push the connector in until it

clicks.

H The other end of the RJ-45 cable is connected to the network

drop assigned by the network tec hnician.

H After the 30-second power on routine, the following states apply.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 87 88

Sin comentarios

Tektronix AD007 Manual de usuario Pagina 35