Tektronix 070-8811-08 Manual de usuario descargar pdf (Pagina 78)

Reference

764 Digital Audio Monitor User Manual

NOTE. RS-232 signals are named from the perspective of the DTE

device. Since the 764 is a DCE device, pin 2 (Received Data) is an

output from the instrument; that is, the data is received by the

connected DTE device.

The 764 supports both hardware (RTS/CTS) and software (Xon/Xoff)

handshaking; choose the appropriate handshaking protocol through

the Serial Port submenu. Set the serial communication parameters of

the connected device to 8 bits, 1 stop bit, and no parity. Be sure that

the same Baud rate is selected at the 764 and the connected device.

Figure 35: Connecting to a DTE device with a DB25 serial port

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 120 121

Sin comentarios

Tektronix 070-8811-08 Manual de usuario Pagina 78