search

Tektronix P H A S E R Phaser 840 Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 72
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
Connecting Your Printer to a Network
2
Setup Guide
9
PhaserShare Series B Token Ring card
The PhaserShare Series B Token Ring port conforms to the IEEE 802.5 standard.
With the PhaserShare Series B Token Ring card, you can connect the printer
directly to a Token Ring network using shielded twisted pair (STP; IBM Type 1)
or unshielded twisted pair (UTP; IBM Type 3) cables. Contact your dealer to
obtain adapters and cables.
N
O
T
E
To fully comply with EMI specifications, the use of shielded or screened cables
may be required. “Shielded” describes IBM-defined cables used with the DB-9
connector. “Screened” describes cables that are electrically similar to Category
4 UTP, but with an added shield or screen.
When a PhaserShare Series B card is purchased initially with the printer, it is
installed at the factory. When a PhaserShare Series B card is purchased later as
an upgrade kit, follow the installation instructions that are shipped with the
card.
When a PhaserShare Series B Token Ring card is installed in the printer, the
printer’s built-in Ethernet connector is disabled.
C
A
U
T
I
O
N
To avoid damaging the network interface, turn off the printer before making any
Token Ring connections.
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 71 72

Comentarios a estos manuales

Sin comentarios
  • Astera EDNord Allure Vivid Red B&W electronics
  • Carrier Compresores de aire C2G Cables displayport Philips Reproductores Blu-Ray Aroma Ollas arroceras H2O Audio Auriculares para móvil
  • Explay L22 DeWalt DW708 Jensen JDTV-1020 Canon PIXMA iP3300 LG MF6543AFK
  • Hp 2310e 23 inch Diagonal LCD Monitor Manual de usuario HP NB230UA Ficha de datos Markbass Distorsore Manual de usuario Canon PowerShot SX50 HS Manual de usuario Yamaha DIO8 Manual de usuario