Tektronix Phaser 340 Manual de usuario descargar pdf (Pagina 109)

Caring for Your Printer

User Manual

4-11

Removing jammed media

To avoid ink smears inside the printer, always try to pull jammed paper or

transparency media out through the top of the printer (the exit cover). If the

jammed media cannot be cleared from the exit cover, open the front cover

and check for jammed media. If the jam is not inside the front cover, remove

the media tray and check for jammed media.

Follow these guidelines when you remove jammed media:

■ Use both hands to gently pull the media through its normal path

out the top of the printer (exit cover), if possible.

■ Do not use excessive force pulling the media; it may tear.

■ After removing the jammed media, inspect it for tears. Leave no

media scraps in the printer.

■ If your prints have ink smears after clearing a jam condition, refer

to “Cleaning for ink smears: internal paper path” on page 4-26.

Check for jammed media that has partially exited the printer’s exit

cover. Remove any jammed media by pulling the media out

through the top of the printer.

Open the front cover and check for jammed media.

9101-22

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 218 219

Sin comentarios

Tektronix Phaser 340 Manual de usuario Pagina 109