Tektronix AFG3000 Manual de usuario Pagina 181
- Pagina / 230
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Syntax and Commands
AFG3000 Series Arbitrary/Function Generators Reference Manual 3-107
*TST?
This command performs a self-test and returns the results.
Group
Calibration and Diagnostic
Related Commands
DIAGnostic[:ALL]?
Syntax
*TST?
Arguments
None
Returns
<NR1>
where
<NR1>=0 indicates that the self-test completed without errors.
<NR1>≠0 indicates that the arbitrary/function generator detected an error.
Examples
*TST?
performs a self-test and returns 0 if no error is reported.
*WAI (No Query Form)
This command prevents the instrument from executing further commands or
queries until all pending commands that generate an OPC message are complete.
Group
Synchronization
Related Commands
*OPC
Syntax
*WAI
Arguments
None
Examples
*WAI
prevents the instrument from executing any further commands or queries until all
pending commands that generate an OPC message are complete.
NOTE. The self-test can take several minutes to complete. During this time, the
arbitrary/function generator does not execute any commands. Do not power off the
instrument during the self-test.
- Reference Manual 1
- AFG3000 Series 1
- Arbitrary/Function Generators 1
- 071-1639-00 1
- WARRANTY 16 3
- Table of Contents 5
- List of Figures 10
- List of Tables 11
- General Safety Summary 13
- Symbols and Terms 14
- Documentation 15
- Contacting Tektronix 16
- Operating Basics 17
- Front Panel Controls 20
- Action Buttons 21
- Menu Buttons 24
- State Buttons 25
- Function Buttons 26
- Shortcut Buttons 27
- Knob and Arrow Keys 27
- BNC Connectors 28
- USB Memory 28
- To Unlock Front Panel 28
- Controls 28
- Main Display Area 29
- Message Display Area 30
- Bezel Menu Display Area 31
- Changing Parameters 32
- Using the Bezel Menu 32
- Numeric Input 33
- The bezel menu is 34
- The value “2” is entered 34
- Using the Shortcut 35
- Period is active 36
- Rear Panel 37
- Reference 39
- Menu Structure 42
- Sine/Square Menu 43
- Ramp Menu 44
- Pulse Menu 44
- Arb Menu 45
- More... Menu 46
- Modulation Parameter 47
- Sweep Parameter Menu 49
- Burst Parameter Menu 51
- Table 2-9: Output Menu 52
- Save/Recall Menu 53
- Edit Menu 54
- Table 2-11: Edit Menu (cont.) 55
- Before executing Line edit 59
- After executing Line edit 59
- Data – Graph display 59
- Data – Table display 59
- Before executing Cut 60
- After executing Cut 60
- Utility Menu 63
- File Operations 68
- Saving a Waveform File 69
- File name box 70
- Browsing Instrument 71
- Setup Files 71
- Saving an Instrument 71
- Setup File 71
- File Management 72
- Conventions 72
- Command and Query 76
- Structure 76
- Query Response 77
- SOURce:PULSe:DCYcle? 50.0 77
- OUTPut:POLarity? NORM 77
- Command Entry 78
- SCPI Commands and 78
- Creating Commands 79
- Parameter Types 79
- Special Characters 80
- Abbreviating Commands 80
- Queries, and Parameters 80
- Chaining Commands and 81
- Units and SI Prefix 81
- General Rules for Using 82
- SCPI commands 82
- Command Groups 83
- Command Descriptions 89
- ABORt (No Query Form) 89
- CALibration[:ALL] 91
- *CLS (No Query Form) 91
- DIAGnostic[:ALL] 92
- DISPlay:CONTrast 93
- DISPlay:SAVer[:STATe] 93
- DISPlay[:WINDow]:TEXT[:DATA] 94
- MEMory:STATe:VALid? 97
- MEMory:STATe:LOCK 98
- MEMory:STATe:RECall:AUTo 99
- MMEMory:CATalog? 100
- MMEMory:CDIRectory 101
- MMEMory:LOCK[:STATe] 103
- OUTPut[1 106
- OUTPut[1 107
- OUTPut[1 107
- OUTPut:TRIGger:MODE 108
- *RCL (No Query Form) 109
- *RST (No Query Form) 110
- *SAV (No Query Form) 110
- [SOURce[1 111
- [SOURce[1 114
- [SOURce[1 115
- [SOURce[1 115
- [SOURce[1 116
- [SOURce[1 117
- [SOURce[1 118
- [SOURce[1 119
- [SOURce[1 120
- [SOURce[1 122
- [SOURce[1 123
- Arguments 124
- Examples 124
- [SOURce[1 126
- [SOURce[1 127
- [SOURce[1 128
- [SOURce[1 129
- [SOURce[1 131
- [SOURce[1 131
- [SOURce[1 132
- [SOURce[1 134
- [SOURce[1 135
- [SOURce[1 138
- [SOURce[1 139
- [SOURce[1 141
- [SOURce[1 142
- [SOURce[1 142
- [SOURce[1 143
- [SOURce[1 145
- [SOURce[1 148
- [SOURce[1 149
- [SOURce]:ROSCillator:SOURce 151
- [SOURce[1 151
- [SOURce[1 152
- [SOURce[1 153
- [SOURce[1 153
- [SOURce[1 154
- [SOURce[1 162
- STATus:OPERation:CONDition? 164
- STATus:OPERation:ENABle 164
- STATus:OPERation[:EVENt]? 165
- STATus:PRESet (No Query Form) 165
- STATus:QUEStionable:ENABle 166
- STATus:QUEStionable[:EVENt]? 167
- SYSTem:BEEPer:STATe 168
- SYSTem:ERRor[:NEXT]? 169
- SYSTem:KCLick[:STATe] 169
- SYSTem:KLOCk[:STATe] 170
- SYSTem:ULANguage 171
- SYSTem:VERSion? 171
- TRACe 172
- TRACe 173
- TRACe 175
- TRACe 177
- TRACe 178
- *TRG (No Query Form) 178
- TRIGger[:SEQuence]:SLOPe 179
- TRIGger[:SEQuence]:SOURce 179
- TRIGger[:SEQuence]:TIMer 180
- *WAI (No Query Form) 181
- Syntax and Commands 182
- Status and Events 183
- Standard/Event Status 187
- Operation Status Block 187
- Questionable Status Block 187
- Registers 188
- Bit Function 192
- 15 to 6 ––––– Not used 192
- 4 to 0 ––––– Not used 192
- Messages and Codes 195
- Execution Errors 197
- Device Specific Errors 199
- Query Errors 199
- Power-on Events 199
- User Request Events 200
- Request Control Events 200
- Operation Complete 200
- Device Errors 201
- Programming Examples 203
- Example 1 206
- Example 2 207
- Appendices 209
- Table A-1: Options 211
- Accessories 212
- Fuse adapter 213
- 0.125 A fuse 213
- General Care 215
- Cleaning 215
- Appendix D: Default Setup 221
Relacionado con productos y manuales para Generadores Tektronix AFG3000
Generadores Tektronix AWG610 Manual de usuario
(466 paginas)
(466 paginas)
Generadores Tektronix MTG100 Manual de usuario
(250 paginas)
(250 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.074 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales