Tektronix AFG3000 Manual de usuario Pagina 215
- Pagina / 230
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
AFG3000 Series Arbitrary/Function Generators Reference Manual B-1
Appendix B: General Care and Cleaning
General Care
Do not store or leave the arbitrary/function generator where the LCD display will
be exposed to direct sunlight for long periods of time.
Cleaning
Inspect the arbitrary/function generator as often as operating conditions require. To
clean the exterior surface, perform the following steps:
1. Remove loose dust on the outside of the instrument with a lint-free cloth. Use
care to avoid scratching the clear plastic display filter.
2. Use a soft cloth dampened with water to clean the instrument. Use an aqueous
solution of 75% isopropyl alcohol for more efficient cleaning.
CAUTION. To avoid damage to the arbitrary/function generator, do not expose the
instrument to sprays, liquids, or solvents.
CAUTION. To avoid damage to the surface of the instrument, do not use any
abrasive or chemical cleaning agents.
- Reference Manual 1
- AFG3000 Series 1
- Arbitrary/Function Generators 1
- 071-1639-00 1
- WARRANTY 16 3
- Table of Contents 5
- List of Figures 10
- List of Tables 11
- General Safety Summary 13
- Symbols and Terms 14
- Documentation 15
- Contacting Tektronix 16
- Operating Basics 17
- Front Panel Controls 20
- Action Buttons 21
- Menu Buttons 24
- State Buttons 25
- Function Buttons 26
- Shortcut Buttons 27
- Knob and Arrow Keys 27
- BNC Connectors 28
- USB Memory 28
- To Unlock Front Panel 28
- Controls 28
- Main Display Area 29
- Message Display Area 30
- Bezel Menu Display Area 31
- Changing Parameters 32
- Using the Bezel Menu 32
- Numeric Input 33
- The bezel menu is 34
- The value “2” is entered 34
- Using the Shortcut 35
- Period is active 36
- Rear Panel 37
- Reference 39
- Menu Structure 42
- Sine/Square Menu 43
- Ramp Menu 44
- Pulse Menu 44
- Arb Menu 45
- More... Menu 46
- Modulation Parameter 47
- Sweep Parameter Menu 49
- Burst Parameter Menu 51
- Table 2-9: Output Menu 52
- Save/Recall Menu 53
- Edit Menu 54
- Table 2-11: Edit Menu (cont.) 55
- Before executing Line edit 59
- After executing Line edit 59
- Data – Graph display 59
- Data – Table display 59
- Before executing Cut 60
- After executing Cut 60
- Utility Menu 63
- File Operations 68
- Saving a Waveform File 69
- File name box 70
- Browsing Instrument 71
- Setup Files 71
- Saving an Instrument 71
- Setup File 71
- File Management 72
- Conventions 72
- Command and Query 76
- Structure 76
- Query Response 77
- SOURce:PULSe:DCYcle? 50.0 77
- OUTPut:POLarity? NORM 77
- Command Entry 78
- SCPI Commands and 78
- Creating Commands 79
- Parameter Types 79
- Special Characters 80
- Abbreviating Commands 80
- Queries, and Parameters 80
- Chaining Commands and 81
- Units and SI Prefix 81
- General Rules for Using 82
- SCPI commands 82
- Command Groups 83
- Command Descriptions 89
- ABORt (No Query Form) 89
- CALibration[:ALL] 91
- *CLS (No Query Form) 91
- DIAGnostic[:ALL] 92
- DISPlay:CONTrast 93
- DISPlay:SAVer[:STATe] 93
- DISPlay[:WINDow]:TEXT[:DATA] 94
- MEMory:STATe:VALid? 97
- MEMory:STATe:LOCK 98
- MEMory:STATe:RECall:AUTo 99
- MMEMory:CATalog? 100
- MMEMory:CDIRectory 101
- MMEMory:LOCK[:STATe] 103
- OUTPut[1 106
- OUTPut[1 107
- OUTPut[1 107
- OUTPut:TRIGger:MODE 108
- *RCL (No Query Form) 109
- *RST (No Query Form) 110
- *SAV (No Query Form) 110
- [SOURce[1 111
- [SOURce[1 114
- [SOURce[1 115
- [SOURce[1 115
- [SOURce[1 116
- [SOURce[1 117
- [SOURce[1 118
- [SOURce[1 119
- [SOURce[1 120
- [SOURce[1 122
- [SOURce[1 123
- Arguments 124
- Examples 124
- [SOURce[1 126
- [SOURce[1 127
- [SOURce[1 128
- [SOURce[1 129
- [SOURce[1 131
- [SOURce[1 131
- [SOURce[1 132
- [SOURce[1 134
- [SOURce[1 135
- [SOURce[1 138
- [SOURce[1 139
- [SOURce[1 141
- [SOURce[1 142
- [SOURce[1 142
- [SOURce[1 143
- [SOURce[1 145
- [SOURce[1 148
- [SOURce[1 149
- [SOURce]:ROSCillator:SOURce 151
- [SOURce[1 151
- [SOURce[1 152
- [SOURce[1 153
- [SOURce[1 153
- [SOURce[1 154
- [SOURce[1 162
- STATus:OPERation:CONDition? 164
- STATus:OPERation:ENABle 164
- STATus:OPERation[:EVENt]? 165
- STATus:PRESet (No Query Form) 165
- STATus:QUEStionable:ENABle 166
- STATus:QUEStionable[:EVENt]? 167
- SYSTem:BEEPer:STATe 168
- SYSTem:ERRor[:NEXT]? 169
- SYSTem:KCLick[:STATe] 169
- SYSTem:KLOCk[:STATe] 170
- SYSTem:ULANguage 171
- SYSTem:VERSion? 171
- TRACe 172
- TRACe 173
- TRACe 175
- TRACe 177
- TRACe 178
- *TRG (No Query Form) 178
- TRIGger[:SEQuence]:SLOPe 179
- TRIGger[:SEQuence]:SOURce 179
- TRIGger[:SEQuence]:TIMer 180
- *WAI (No Query Form) 181
- Syntax and Commands 182
- Status and Events 183
- Standard/Event Status 187
- Operation Status Block 187
- Questionable Status Block 187
- Registers 188
- Bit Function 192
- 15 to 6 ––––– Not used 192
- 4 to 0 ––––– Not used 192
- Messages and Codes 195
- Execution Errors 197
- Device Specific Errors 199
- Query Errors 199
- Power-on Events 199
- User Request Events 200
- Request Control Events 200
- Operation Complete 200
- Device Errors 201
- Programming Examples 203
- Example 1 206
- Example 2 207
- Appendices 209
- Table A-1: Options 211
- Accessories 212
- Fuse adapter 213
- 0.125 A fuse 213
- General Care 215
- Cleaning 215
- Appendix D: Default Setup 221
Relacionado con productos y manuales para Generadores Tektronix AFG3000
Generadores Tektronix AWG610 Manual de usuario
(466 paginas)
(466 paginas)
Generadores Tektronix MTG100 Manual de usuario
(250 paginas)
(250 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.039 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales