Tektronix Thermometer P7240 Manual de usuario descargar pdf (Pagina 23)

P7240 4 GHz 5X Active Probe User Manual

Functional Check

A functional check may be performed using the PROBE COM-

PENSATION connections on the front panel of the oscilloscope. See

Figure 3.

Figure 3: Probe functional check connections

1. Connect the probe to a TekConnect receptacle on the oscillo-

scope.

2. Set the oscilloscope to display the appropriate probe channel.

3. Using a ground lea d and SMT KlipChip, connect the probe

ground to the outer ri ng of the PROBE COMPENSATION

connector on the oscilloscope.

4. Using a standard t ip, hold the probe to the center conductor of the

PROBE COMPENSATION BNC connector on the oscilloscope.

5. Press AUTOSET, or adjust the oscilloscope to display a stable

calibration waveform. (You may need to adjust the probe offset to

display the waveform.)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 45 46

Sin comentarios

Tektronix Thermometer P7240 Manual de usuario Pagina 23