Tektronix DPO4000 Manual de usuario Pagina 176

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 585
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 175
Commands Listed in Alphabetical Order
NOTE. Do not use
DHCP/BOOTP searching if your oscilloscope has been
assigned a static address on a n etwork. If you set this command to ON, the
DHCP/BOOTP search will delete or change your static IP address information.
OFF disables the oscilloscope to search the network for a DHCP or BOOTP server.
Examples
ETHERNET:DHCPBOOTP ON sets the oscilloscope to search for a DHCP or BOOTP
server and assign a dynamic IP address to the oscilloscope.
ETHERnet:DNS:IPADDress
Sets or returns the network Domain Name S erver (Dns) IP address.
Group
Ethernet
Syntax
ETHERnet:DNS:IPADDress <QString>
ETHERnet:DNS:IPADDress?
Arguments
<QString> is a standard IP address value, enclosed in quotes.
Examples
ETHERNET:DNS:IPADDRESS “128.196.13.352” sets the Dns IP address that
the oscilloscope uses to communicate with the n etwork.
ETHERnet:DOMAINname
Sets or returns the network domain name.
Group
Ethernet
Syntax
ETHERnet:DOMAINname <Qstring>
ETHERnet:DOMAINname?
Arguments
<QString> is the network domain name, enclosed in q uotes.
Examples
ETHERNET:DOMAINNAME “Alpha1.Mycorp.com” sets the domain name that
the oscilloscope uses to communicate with the n etwork.
2-166 MSO4000 and DPO4000 Series Programmer Manual
Vista de pagina 175
1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 584 585

Comentarios a estos manuales

Sin comentarios