Tektronix DPO4000 Manual de usuario Pagina 331

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 585
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 330
Commands Listed in Alphabetical Order
Group
Vertical
Syntax
REF<x>:VERTical:POSition <NR3>
REF<x>:VERTical:POSition?
Related Commands
CH<x>:POSition, MATH[1]:VERTical:POSition
Arguments
<NR3> is the desired position, in divisions from the center horizontal graticule.
The range is from -5.0 to 5.0 divisions.
Examples
REF2:VERTICAL:POSITION 1.3E+00 positions the R eference 2 input signal
1.3 divisions above the center horizontal graticule.
REF1:VERTICAL:POSITION? might return :REF1:VERTICAL:POSITION
-1.3000E+00
indicating that the current position of Reference 1 is 1.3 divisions
below the center horizontal graticule.
REF<x>:VERTical:SCAle
Sets or returns the vertical scale for the reference waveform specied by <x>,
where x is the reference channel number.
Each waveform has a vertical scale parameter. For a signal with constant
amplitude, increasing the Scale causes the waveform to be displayed smaller.
Decreasing the scale causes the waveform to be displayed larger.
Scale affects all waveforms, but a ffects reference and math waveforms differently
from channel waveforms:
For reference and math waveforms, this setting controls the display only,
graphically scaling these waveforms and having no affect on the acquisition
hardware.
For channel waveforms, this setting controls the vertical size of the a cquisition
window as well as the display scale. The range and resolution of scale
values depends on the probe attached and any other external factors you have
specied.
Group
Vertical
Syntax
REF<x>:VERTical:SCAle <NR3>
REF<x>:VERTical:SCAle?
Related Commands
CH<x>:SCAle, MATH[1]:VERTical:SCAle
MSO4000 and DPO4000 Series Programmer Manual 2-321
Vista de pagina 330
1 2 ... 326 327 328 329 330 331 332 333 334 335 336 ... 584 585

Comentarios a estos manuales

Sin comentarios